Vaping is a popular way to consume nicotine or other substances. One of the most popular devices for vaping is the Crystal Bar Vape. This device comes in various flavours and is available in most vape shops. However, if you are new to vaping, it can be a bit overwhelming to know how to use it.
Let us provide you with a step-by-step guide to using the Crystal Bar to help you achieve vaping success.
Choose Your Crystal Bar Flavour:
The first step in using a Crystal Bar Vape is to choose your preferred flavour. Crystal Bars offer a variety of flavours, from fruity to sweet, sour, and menthol. You can visit a vape shop near you or check the Crystal Bar website to explore the flavours available on online vape shops.
Charge The Device:
Before using the Crystal Bars, ensure that the device is fully charged. You can charge the device using the USB cable that comes with the device. Plug one end of the cable into the vape device and the other end into a USB port.
Fill The Tank:
Once the device is fully charged, fill the tank with your preferred Crystal Bar flavour. To do this, remove the tank from the device and unscrew the top cap. You will see a small hole in the centre of the tank.
Carefully pour the e-liquid into the tank, ensuring that you do not spill any of it. Once the tank is full, screw the top cap back onto the tank.
Prime The Coil:
The coil is a small component that heats the e-liquid to create vapour. Before using the device, it is essential to prime the coil to ensure that it functions correctly. To prime the coil, apply a few drops of e-liquid directly onto the coil. Once you have done this, screw the coil back into the tank.
Assemble The device:
After priming the coil, reattach the top cap to the tank and screw it into the device. Make sure that the device is properly assembled before using it.
Turn On The Device:
To turn on the Crystal Bar Vape, press the button on the device five times quickly. The button is usually located on the side of the device. You will see the device light up to indicate that it is now turned on.
Adjust the Settings:
The Crystal Bar comes with various settings that you can adjust to customise your vaping experience. To access the settings, press the button on the device three times quickly. You can then use the button for cycling through the different settings.
Once you have selected the setting you want, press the button again to confirm your selection.
Inhale:
Now that the device is turned on and set up, you can start vaping. Hold the device up to your mouth and inhale through the mouthpiece. You will feel the vapour enter your mouth. Hold the vapour in your mouth for a few seconds before exhaling it through your nose or mouth.
Turn Off The Device:
When you are finished vaping, it is essential to turn off the device to conserve battery life. To turn off the Crystal Bar Vape, press the button on the device five times quickly. The device will then turn off, and the light will go out.
Maintain Your Device:
To ensure that your Crystal Bar device lasts longer, you need to maintain it properly. This includes cleaning the device regularly, replacing the coil when it starts to wear out, and storing the device in a cool and dry place.
Conclusion:
Using a Crystal Bar device is a simple and straightforward process. By following the steps mentioned in this guide, you can enjoy a successful vaping experience with your preferred Crystal Bar flavour.
Always remember to maintain your device correctly to ensure that it lasts longer and provides you with the best vaping experience possible.