Ceramic coatings are no less than a blessing for a car enthusiast. You can either get the coating applied by a professional detailer or take the DIY route. Whatever option you choose, it is essential to keep the coating in tip-top shape. One of the best ways of accomplishing this is by washing the ceramic coating as per the directions by the manufacturer.
Maintaining a ceramic coating is not easy as it seems to be. You can never have a one-size-fits-all solution. A few of the ceramic paint protection options need to be inspected annually by the service provider that installed them originally. The maintenance can be handled if the correct procedure is followed.
Importance of Maintaining a Ceramic Coating
A ceramic coating has proven to be a great paint protection solution. However, there’s a misconception that there’s no need to wash the car once you have it applied. You should wash your car at least every two weeks. The ceramic coating will not completely clean the vehicle and the residue of contaminants can get stuck to the coated surface. With time, more and more small particles will start sticking and begin to layer. This will make the vehicle quite dirty. Due to all these reasons, it is highly recommended to maintain the coating with a good car wash once a couple of weeks.
Do you want to know what are the best ways of maintaining a ceramic coating? The below mentioned information will be quite helpful for you. So, without further ado, let’s get started!
-
Use a pH Neutral Car Shampoo
Ceramic coating provides a hard and sturdy layer on the paint job of your car. The coating also blocks the harmful UV rays of the sun. It forms a flat or hydrophobic surface ensuring any of the contaminants don’t stick to the coating’s layer. This makes removing the different types of debris quite easy.
This means you shouldn’t use any harsh or aggressive car shampoo or clay bar for cleaning the surface. It is advisable to use a pH-neutral car shampoo that doesn’t consist of any wax. The wax tends to leave a residue on the coating that reduces the hydrophobic properties. This leads to debris sticking to that wax and makes it dirtier. Therefore, it is better to choose a pH neutral and professional grade aftercare shampoo for maintaining the coating.
-
Don’t Use an Automated Car Wash
If you don’t want to ruin your ceramic coated car then avoid taking it to the drive through car washes. This is because the brushes and curtain-looking mop-type cleaning rags can cause severe damage to the coating.
When it comes to preserving your ceramic coating, bypassing drive-through carwashes and opting for car valeting in Liverpool ensures meticulous care and expertise. Choosing a professinal car valeting servie not only guarantees meticulous care but also avoids the potential hard that car washes pose to your ceramic coating.
These car washes can damage the ceramic coating in a matter of seconds. The soaps used are typically pH aggressive and are the same as an industrial detergent. Also, the purpose of washing media materials is longevity rather than not soft cleaning.
-
Wash the Vehicle During Low Light Hours
The best time to wash your car is during low sunlight conditions like early in the morning, on a cloudy day, or when the sun is about to set. All these times are optimum for washing and drying the vehicle. When there is excess sunlight, it will dry the soap more quickly on top of the coating leading to water spots and streaks.
-
Don’t Try Different Products
While most car enthusiasts like trying different products for their cars, this isn’t a smart idea as far as ceramic boosts or maintenance sprays are concerned. Using the same SiO2 boost spray will ruin the ceramic coating of your car. Therefore, it is critical to have consistency with the car care product you are using. Before buying any product, it is essential to consult the ceramic coating manufacturer that had applied the coating on your car in the first place and ask them for their advice regarding the product they recommend. When multiple spray coatings are used it can result in compatibility issues, damage the coating, and also lead to paint correction.
-
Only Use Clean Media
During the process of washing, drying, or applying a specific product to a coated car, it’s essential to avoid cross contamination of other cleaning supplies. Before using the microfiber towel, wash mitt, or buckets, you need to ensure these are completely clean and don’t consist of any cleaners, debris, or degreasers.
Final Thoughts
The above information is quite helpful for someone who has got a ceramic coating applied on their car. Keeping it in top-notch condition will enable you to make the most of your investment and keep your car shining for the longest time. To get the required results and take the best care of your car you should only get a high grade ceramic coating applied from a trusted service provider.
It’s essential to take extra care of your car’s inner and outer parts so the beauty and the service will last long. Feel free to check the car user manuals for more tips about your vehicle.
